东莞市瑞力检测设备有限公司

专注于可靠性模拟环境测试设备,一站式解决方案生产厂家


13045882920
产品详情
电池挤压试验机
类别: 振动试验机
型号: RL-JY-1
产品详情
产品用途Purpose:
通过挤压试验检验电池的安全性能,进行试验后电池应不起火,不爆炸,也是各电池厂家及研究所必不可少的检测设备。
Battery is inspected on safety performances through compression test. Safety performance is testified only if there is no fire or explosion in test.This equipment is indispensable inspect device for battery manufactures and research institutes.
产品特点Product Feature
电线外套均套有金属防火管,有效阻止电池试验过程着火而燃烧的现象;
装照明灯管,在外面可清楚看清工作室内情况;
挤压力量值250N~13KN可随意设置,满足不同标准要求;
装测试孔及补风口,补风口+排气扇会更有效将试验废气及气压迅速排除;测试孔提供试验者
如想探测试验空间里的温度或气压而设计;
控制部分与试验箱采用分离形式,可在1~2米处操作,起到一定的安全措施。
Electrical wire is sheathed in metal fire-retard tube, to prevent ignition caused by fire in batterytest.
Equipped with Lighting lamp, test area is visible from outside;
Compression force can be set from 250N to 13KN, as per requirement in specific standard.
Equipped with test hole and tuyere;Through tuyere and fan,exhaust gas is cleared out,and
pressure equalized rapidly; Through Test hole, temperature and air pressure in test area can be measured easily.
Controller device is detached from test chamber;As a safety measure,the equipment is operated 1-2 meters from the test chamber.
标准依据Standard Basis
MT/T 1051-2007《矿灯用锂离子蓄电池-挤压试验》
uL1642安全标准《压缩测试》
uL 2054安全标准《压缩测试》
GB/T 2900.11-1988矿灯用锂离子蓄电池安全性能检验规范《挤压》
YD 1268-2003移动通信手持机锉电池及充电器的安全要求《耐挤压性能》
sJ/T 11169-1998锂电池标准《挤压试验》
GB/T 8897.4-2002原电池第4部分肛电池的安全要求《挤压》
SJ/T11170-1998家用及商用电池安全标准《挤压》
DB 032-2009通信用后备式锂离子电池组《抗挤压》
QB/T 2502—2000锂离子蓄电池总规范《挤压(内部短路)试验》
MTT 1051-2007 Compression test:Lithium-ion batteries for miner lamp;
UL1642 Compression test of Standard for Safety;
UL 2054 Compression test of Standard for Safety;
GB/T 2900.11-1988 Compression, safety inspection of lithium-ion batteries for miner lamp;
YD 1268-2003 Compression-resistance performance, safety requirement of batteries and chargers for mobile handset,
SJ/T 11169-1998 Compression test of lithium-ion battery standards;
GB/T8897.4-2002 Compression, safety requirement for lithium-ion in part 4, galvanic battery;
SJ/T11170-1998 Compression, safety standard for household and commercial batteries;
YDB 032-2009 Compression resistance, lithium-ion battery for communication;
QB/T 2502—2000 Compression test(internal short-circuit), general specification of lithium-ion batteries;
技术参数Technical parameter
型号 ModelRL-JY-1
压力(KN)Force20
最大位移(mm)Max.Displacement200、300、500
辅助功能(选配)Accessibility(optional)

电压、温度采集、视频监控系统、灭火系统、安全防爆系统、烟雾过滤系统

Voltage, temperature collection, video monitoring system, fire extinguishing system,explosion protection system, smoke filter system

挤压速度Compression Speed0~40mm/min(可调adjustable )
测试空间(mm) Test Space200x200x200mm、300x300x300mm (可按要求定制can customize according to requirement)
外形尺寸(WxDxH)External size680×570x1740
电压选择Voltage Select0-10V,0-100V,0-1000v
温度采集范围Temperature Acquisition Range0~1200°℃
电压、温度精度Accuracy of voltage and temperature±1%FS
电压分辨率Voltage Resolution1mv
温度分辨率Temperature Resolution0.1C
速度Speed

0~40mm/min(可调adjustable)

挤压行程Compression Stroke0~300mm范围内可选 Select within 0~300mm
结构 Structure

立式、卧式(可根据实际尺寸选择)

Vertical/Horizontal type(choose according to actual dimension)

试验条件Test Conditions

作用力大约13KN,一旦达到最大压力即可泄压

Applied force is approximately 13KN; when it reach the max.value, the air press can be released

挤压方式 Compression Method

横向、纵向Transverse,Longitudinal

挤压变形量Compression Deformation无(如需要则需另选电脑控制系统系列)Non (if needed,please select computer-control system series)
挤压保持时间Compression Retaining Time0~99小时99分99秒0-99hrs99mins99secs
驱动方式Dive Method液压Hydraulic
挤压精度Needling Accuracy1%
箱体Chamber Body立式或卧式结构与控制部分分开Vertical/ Horizontal type,apart with control part
通讯 Communication无(如需要有则可选电脑控制)No (if need,please choose computer control type)
挤压夹具 Communication独立远程采集隔离,多路电压、温度、电流采集通道、确保数据无误(选配)Independent remote
数据采集模块Data Acquisition Module

独立远程采集隔离,多路电压、温度、电流采集通道、确保数据无误

Independent remote acquisition and isolation,multiplex voltage, temperature, current acquisition channel, ensure data correct(optional)

通道数量标配Channel Quantity Standard Configuration

2通道、4通道、8通道,多种数据采集系统(选配)

2channel,4channel,8 channel,multiple data acquisition system(optional)

摄像监控系统 Camera Monitoring System

测试区域装配高清摄像监控系统,并可远程控制,具有防爆功能(选配)

Test area install high definition video monitoring system,can remote control, explosion proof function(optional)

标准配置 Standard Configuration

挤压主机1套,控制柜1套,挤压盘1个

Host computer 1 set,controller cabinet 1set, compression plate 1 set

测试夹具Test Clamp

特定制作,根据样品实际使用条件而定

Specific production,customize by sample actual usage condition

电源电压Power SupplyAC380V 50HZ三相五线制AC380V 50HZ three phases five wires
使用环境 Usage Environment0°C~45°℃



东莞市瑞力检测设备有限公司
刘先生:13045882920
Q Q :  719714472 
邮箱:719714472@qq.com
公司地址:广东省东莞市东城街道温塘东路240号
工厂地址:东莞市常平镇土塘第二工业区港建路30号B栋
添加微信